Independent Rear Suspension, OEM, aftermarket, stock configuration or heavily modified, all makes and models, everyone is welcome here!!!

You are not logged in. Would you like to login?



8/02/2021 4:02 pm  #1


Newb advice

Ok, let me see if I can post pics. Be patient.

http://imgur.com/gallery/6lVE00N
I may have to edit this from a pc- sorry about the pic link.

It's obviously not done. But if you see something I should change, let me know.

Last edited by NBF823 (8/02/2021 4:09 pm)

 

8/04/2021 9:02 am  #2


Re: Newb advice

Thit is well built.  how much does it weigh?


If it isn't broken..... modify it anyway!!!!
http://dazecars.com/dazed/JagArmssignature.jpg
 

8/05/2021 10:49 am  #3


Re: Newb advice

Daze wrote:

Thit is well built.  how much does it weigh?

 

Probably alot more than the original. I have alot more brackets, fitting, and seam welding to go. I'll weigh the whole car at the end.

I could probably also shave some weight here and there on the lower controls. I made them telescope, and just tacked them, as measuring the original leaf and pirch didn't seem very accurate. Once I know it's straight for sure, then I can go to town on refining it.

I wanted to keep the original frame rails, which caused an unbelievable headache. I also wanted more than two inches of compression. The original rails are about 3" in front of the axle. So the uppers are behind the axles. The lowers are forward - mad caster. But putting the upper above the axle would have left me with very little travel. I'm in PA and the roads are terrible here.

The car is a 78 trans am. The diff and axles, which I'm hoping to test fit next week, are 04 svt mustang with G force axles.

It's really complex to describe it all. I also wanted to fit the original 15x8 snowflake wheels. Which I think I'm getting away with. Also factory rear rotors.

The shocks and springs I'm hoping to mount in the trunk horizontal - pushrods. I also grabbed an electronic rear steering rack from a 300zx, I may implement.

     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum