Independent Rear Suspension, OEM, aftermarket, stock configuration or heavily modified, all makes and models, everyone is welcome here!!!

You are not logged in. Would you like to login?



5/17/2011 7:36 pm  #1


Hey Joe, I took your brake fitting idea and modified it

For those who have not seen Joe's brake fitting upgrade for the Jag here a thread
http://irsforum.boardhost.com/viewtopic.php?id=27

I loved the idea and ordered all the fitting I needed , but after I got them, I was concerned how far the bulkhead fittings stuck out so I decided to go a different way.  I had some -3 an to inverted flair adapters and some copper washers and I used them to convert my calipers to take an an -3 line


I was one fitting short so as a temporary fix I cut one of my bulkhead fittings and a person could do the same if they wanted to.


I also assembled my remote bleeder set up and will be posting some pix of it once it is in the car. (also shown in the thread I linked)


If it isn't broken..... modify it anyway!!!!
 

5/18/2011 5:59 pm  #2


Re: Hey Joe, I took your brake fitting idea and modified it

Ahh ... the copper washer you got to love it ... nice work Daze.

Last edited by Joe (5/18/2011 6:03 pm)


If it's worth building ... it's worth over building
 

Board footera

 

Powered by Boardhost. Create a Free Forum