|
|
|
 |
 |
 |
You are not logged in. Would you like to login?
Offline
Does anybody know of anyone who makes a coilover conversion kit for the 84 to 87 C4 fronts? Thanks, Steve
Offline
Yes, Van Steel is one. I know there are others.
Ralphy
Offline
Any others/ Steve
Thread StarterOffline
Steve -
Just looking at the VanSteel bits - the C4 front setup up looks pretty vanillia. WIth the measurements you'd have a wider selection -- but I think it would be hard to find better value than the QA-1s offer. I did a quick look and there are some mods needed on the C4 chassis - but you already in waist deep on you project - so expect those mounts would be worked anyway.
PICS soon?
Cheers - Jim
Offline
This might be the other I heard mentioned. I didn't dig into the site.
Ralphy
Offline
Steve,
Maybe you saw this?
Ralphy
Offline
Ralphy,I saw that post. I picked up the 84 C4 front and rear Friday. I'm going to start the jigs to hold the rear today. I bought some Exotic Muschel trailing arms with heims and the brackets to the frame, and the strut rods with the brackets for the rear end. Progressive Automotive has the brackets to mount the coilovers to the lower A arms. The bracket bolts to the lower A arm , but mine don't have the holes. So I have to call them and see if i have the right lowers.I don't know about drilling them I don't want to weaken them. Chevy says 84 -90 are the same part # upper and lower. So I have more researching to do.I looked a Mo's we site. www.ndneyes.com/mo and found the QA1 part numbers he used. So the search goes on. I've been searching other sites and have found some useful info. Thanks, Steve
Thread Starter
1 of 1