Independent Rear Suspension, OEM, aftermarket, stock configuration or heavily modified, all makes and models, everyone is welcome here!!!

You are not logged in. Would you like to login?



  • Index
  •  » Independent Rear Suspension Forum
  •  » Very cool tool

    • 1 of 1

       

    10/28/2011 9:05 pm  #1

    montez27
    New member

    Offline

    Registered: 10/24/2011
    Posts: 7

    Very cool tool

    http://www.racingaspirations.com/?p=286

       I'll be using this for my mock up for sure.. Thought you all could use it as well.

     

    10/28/2011 9:50 pm  #2

    Daze
    Administrator

    Offline

    From: Kalispell, MT
    Registered: 9/22/2010
    Posts: 1,263

    Re: Very cool tool

    WOW that is a fantastic calculator, thanks for sharing!!!

    If it isn't broken..... modify it anyway!!!!
     

    10/30/2011 10:47 am  #3

    JEM
    Member

    Offline

    Registered: 9/06/2011
    Posts: 78

    Re: Very cool tool

    This is a meaesuring-tape-eyeballs-and-a-couple-of-straight-edges measurement quality model of the FN10/MN12 rear:

    http://www.racingaspirations.com/suspensiongeometry.php?tcx=66&tcy=136&thx=291&thy=120&bcx=8&bcy=238&bhx=300&bhy=248&scl=1.5

    -0.8deg camber per inch of bump for first 2in from approx normal ride height, 0.4deg per inch of droop.

    Track change a bit under 4mm per side at 2in bump, 2.25mm at 2in droop.

    Last edited by JEM (10/30/2011 10:57 am)

     

     

    1 of 1

  • Index
  •  » Independent Rear Suspension Forum
  •  »  Very cool tool

    • Board footera

     

    Powered by Boardhost. Create a Free Forum