Independent Rear Suspension, OEM, aftermarket, stock configuration or heavily modified, all makes and models, everyone is welcome here!!!

You are not logged in. Would you like to login?



  • Index
  •  » Original IRS forum Content
  •  » Hey Mustsed, did you ever take any measurements to check for clearance

    • 1 of 1

       

    10/27/2011 7:35 pm  #1

    Daze
    Administrator

    Offline

    From: Kalispell, MT
    Registered: 9/22/2010
    Posts: 1,263

    Hey Mustsed, did you ever take any measurements to check for clearance

    on September 10, 2010, 9:00 am, Daze wrote:

    sub frames and the hub??? Also did you see my post with a possible fix for the problem??

    If it isn't broken..... modify it anyway!!!!
     

    10/27/2011 7:36 pm  #2

    Daze
    Administrator

    Offline

    From: Kalispell, MT
    Registered: 9/22/2010
    Posts: 1,263

    Re: Hey Mustsed, did you ever take any measurements to check for clearance

    on September 10, 2010, 10:18 pm, Mustsed wrote:

    Yes I did and still thinking about the problem but...... not yet so far to test. While assembling the DS IRS LCA and halfshaft + Hub I decided that the PS is not as clean as the DS so re-assembling and cleaning is on schedule again.
    The shop circumstances are forcing me to do the install very very soon. Will report on this as soon as I get there (or close).

    Mustsed

    If it isn't broken..... modify it anyway!!!!
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » Original IRS forum Content
  •  »  Hey Mustsed, did you ever take any measurements to check for clearance

    • Board footera

     

    Powered by Boardhost. Create a Free Forum