Independent Rear Suspension, OEM, aftermarket, stock configuration or heavily modified, all makes and models, everyone is welcome here!!!

You are not logged in. Would you like to login?



10/27/2011 5:19 pm  #1


So Ralphy, what exactly is this part?

on August 24, 2010, 11:00 am, Daze wrote:

   


If it isn't broken..... modify it anyway!!!!
 

10/27/2011 5:21 pm  #2


Re: So Ralphy, what exactly is this part?

on August 24, 2010, 5:06 pm, Ralphy wrote:

  That is the bearing carrier for the Guldstrand C3 conversion. The two bolts are where the forward links go, the lower left bolt is for a coilover if wanted. The camber rods fit outside on the long bolt. Then the bearing carrier mounts through the large center hole and between where you see the spacer on the longest bolt. Then the area with the letters are where you would mount the leaf spring if you preferd.

I got the pic from the moderator of a board called www.vettemod.com. He has bought and used the Guldstrand on a few customer cars. He says they work pretty well. These guys at Vettemod are racers.

They prefer to do a total mod to the vette suspension with upper and lower contrl arms and splined two piece halfshafts. Very informative bunch of international people.

http://vettemod.com/forum/index.php


If it isn't broken..... modify it anyway!!!!
     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum