on May 26, 2010, 3:50 pm, Daze wrote:

Started rebuilding my brake calipers yesterday and I started with the ones that came on the assembly that is going in my car. They were hard to get apart, and I ended up braking one of the bleeder screws off, also the pistons were all bad. Fortunately I had another set of calipers that came with the second IRS unit I bought and since I will be using XJ40 out board discs on that set up I didn't need the extra calipers. The second set came apart no problem. The pistons probably could have been reused, but I decided to replace them anyway. I may still try to get the bleeder screw out of the first set. If it comes out I may rebuild them two, just because I have the parts.